Panasonic KX-TDA100D Features Manual page 247

–
KX-TCA355
–
KX-TD7680
–
KX-TD7684
–
KX-TD7694
•
Incoming trunk call information is shown on a PS display when a trunk call arrives at a PS ring group which
the PS joins. The display information can be selected on a PS ring group basis through system
programming: Called Party's Name/Number or Caller's Name/Number.
•
Calling Multiple PSs Simultaneously
There are two methods to call multiple PSs simultaneously using the floating extension number assigned
to the following groups:
Method
Incoming Call
Distribution Group
PS Ring Group
•
When a PS joins a PS ring group, the following personal settings are disregarded:
a.
When the PS ring group is called:
–
Delayed Ringing
–
Display information when the incoming calls arrive;
The settings (e.g., display priority) are disregarded.
–
The setting which is assigned on the PS (e.g., FWD)
–
The status of the PS (e.g., busy)
b.
Log-in/log-out setting (from the PS ring group/from the incoming call distribution group which the PS
ring group belongs to). (® 1.2.2.7 Log-in/Log-out)
Note
Log-in/log-out setting of the PS ring group from the incoming call distribution group is also disregarded.
Log-out
Log-in
Assignment
Assign all desired PSs to
one incoming call
distribution group, and set
the group call distribution
method for the group to
"Ring".
® 1.2.2 Incoming Call
Distribution Group Features
Assign all desired PSs to
one PS ring group.
PS Ring Group
Merit
All PS users in the
group can use the
Log-in/Log-out
feature, Wrap-up
feature, and ICD
Group button for the
group.
Only one channel is
used when a call
arrives at the group.
1.25.2 PS Ring Group
Demerit
The CS may often be
busy as each PS in
the group uses one
channel when a call
arrives at the group.
PS users in the group
cannot use the
Log-in/Log-out and
Wrap-up features.
Feature Guide 247