Panasonic KX-TDA100D Features Manual page 338

2.2.3 Tenant Service
Caller
COS 4
COS 5
COS 6
:
ü: Block
Explanation:
1.
Assign each extension in a tenant to a certain COS number. Each tenant must have unique COS
numbers.
Tenant 1: COS 1 and COS 2
Tenant 2: COS 3 and COS 4
Tenant 3: COS 5 and COS 6
2.
Tenant-to-Tenant Call Block enables by the Internal Call Block feature.
a.
Tenant 1 (COS 1 and COS 2) can make calls to both Tenant 2 (COS 3 and COS 4) and Tenant 3
(COS 5 and COS 6) as well as Tenant 1.
b.
Tenant 2 (COS 3 and COS 4) can make calls to Tenant 1 (COS 1 and COS 2) and Tenant 2.
c.
Tenant 3 (COS 5 and COS 6) can make calls to Tenant 3 itself only.
•
An incoming call distribution group must belong to one tenant because the following features are
determined on a tenant basis (® 1.2.2.1 Incoming Call Distribution Group Features—SUMMARY):
–
Music on Hold while a call is waiting in the queue
–
The Time Table which determines the overflow destination.
PT Programming Manual References
[001] System Speed Dialling Number
[006] Operator Assignment
[320] ARS Mode
[711] Music on Hold
Feature Guide References
3.1 Capacity of System Resources
338 Feature Guide
COS 1 COS 2
ü ü
ü ü
: :
Called Party
COS 3 COS 4
ü ü
ü ü
: :
COS 5 COS 6
ü ü
: :
...
...
...
...
: