Speed Dialling-Personal/System - Panasonic KX-TDA100D Features Manual

1.6.1.5 Speed Dialling—Personal/System
Description
An extension user can make calls using abbreviated dialling for frequently dialled numbers which are stored
in the PBX extension data, or the PBX system data.
Personal Speed Dialling is also known as Station Speed Dialling.
Conditions
[General]
•
Any number (e.g., telephone number, feature number) can be stored in a speed dialling number. A name
can be assigned to each Personal Speed Dialling number through personal programming, and System
Speed Dialling number.
•
Call Directory—Speed Dialling
Display PT users can make a call by selecting stored names on the display.
[Personal Speed Dialling]
•
Display Lock
An extension user can lock the Personal Speed Dialling number display to prevent the numbers from being
viewed at any extension through personal programming (Display Lock). In this case, the Incoming/Outgoing
Call Log displays and the SVM Log display are also locked, and the voice messages in the user's message
box cannot be played back. An extension personal identification number (PIN) is required to use this
feature. (® 1.28.1 Extension Personal Identification Number (PIN))
[System Speed Dialling]
•
TRS/Barring Override by System Speed Dialling
It is possible to override the TRS/Barring using the System Speed Dialling. (® 1.9.1 Toll Restriction (TRS)/
Call Barring (Barring))
•
System Speed Dialling Display by AUTO DIAL/STORE Button
Pressing the AUTO DIAL/STORE button on a display DPT while on-hook can display the System Speed
Dialling Directory.
•
System Speed Dialling numbers can be assigned separately for each tenant. Each tenant can select to
use either the original set of common System Speed Dialling numbers or the set of System Speed Dialling
numbers designated specifically for that tenant.
PT Programming Manual References
[001] System Speed Dialling Number
[002] System Speed Dialling Name
[509] TRS/Barring Level for System Speed Dialling
Feature Guide References
3.1 Capacity of System Resources
User Manual References
1.2.2 Easy Dialling
1.13.1 Using the Call Log
1.13.2 Using the Directories
3.1.2 Settings on the Programming Mode
1.6.1 Memory Dialling Features
Feature Guide 97