Panasonic KX-TDA100D Features Manual page 356

2.3.6 Flexible Numbering/Fixed Numbering
Hot Line programme/set/cancel
Absent Message set/cancel
BGM set/cancel
Remote Wake-up Call
Timed Reminder set/cancel
Printing Message
Extension Dial Lock set/cancel
Time Service Switch
Remote Extension Dial Lock off
Remote Extension Dial Lock on
NDSS Monitor Release
Trunk Busy Out Clear
Extension Feature Clear
Extension Personal Identification Number (PIN) set/cancel
Dial Information (CTI)
Other PBX Extension Number (TIE) 1–16
Quick Dialling
*1 It is possible to register Quick Dialling numbers that overlap with other registered numbers. This is used for Automatic Rerouting
of Calls via a Private IP Network to Public Trunks.
2.
Flexible Numbering (available while a busy, DND, or ringback tone is heard)
Feature numbers which are available while a busy, DND, or ringback tone is heard can be customised for
easy use. The numbers should be one digit ("0" through "9", " ", or "#") and must not conflict. For default,
refer to the following table:
[Flexible Numbering Table (available while a busy, DND, or ringback tone is heard)]
Call Waiting/DND Override
Executive Busy Override
Message Waiting set
Call Monitor
Automatic Callback Busy/CCBS
Alternate Calling—Ring/Voice
*1
To use Call Waiting/DND Override, both "1" and "2" are available by default.
356 Feature Guide
Feature
*1
Feature
Default
Type 1 Type 2
(with ) (without
740 740
750 750
751 751
76 76
760 760
761 761
77 77
780 780
782 782
783 783
784 784
785 None
790 790
799 799
None None
None None
None None
Default
1 or 2
*1
3
4
5
6
)