Panasonic KX-TDA100D Features Manual page 297

Case 1:
Extension 1012 of PBX-1 dials extension number "1011".
® The dialled number is found at the local PBX, so extension 1012 of PBX-1 is connected to extension
1011 of PBX-1.
Case 2:
Extension 1012 of PBX-1 dials extension number "1033".
® The dialled number is not found at the local PBX, so the call is redirected to the specified TIE Line, and
extension 1012 of PBX-1 is connected to extension 1033 of PBX-2.
Case 3:
A public trunk call directed to extension 1033 arrives at PBX-1.
® The target extension number is not found at the local PBX, so the call is redirected to the specified TIE
Line, and the call is connected to extension 1033 of PBX-2.
–
Hardware Requirement:
The KX-TDA0920 SD Memory Card for Software Upgrade to Enhanced Version
–
System programming is required to enable this feature.
–
If a dialled number is not found at a remote PBX, the call cannot be redirected to the local PBX to
search for a matching number.
•
When a TIE line call arrives at a busy extension which has disabled Call Waiting, the caller will hear a busy
tone. If required, Intercept Routing—Busy/DND can be activated.
•
The Inter-digit time can be assigned for TIE line calls.
PT Programming Manual References
[453] DID Destination
[500] Trunk Group Number
Feature Guide References
1.1.1.6 Intercept Routing
1.3.1.2 Call Forwarding (FWD)
1.9.1 Toll Restriction (TRS)/Call Barring (Barring)
1.10.1 Automatic Route Selection (ARS)
1.12.1 Call Transfer
1.17.6 Direct Inward System Access (DISA)
2.3.6 Flexible Numbering/Fixed Numbering
3.1 Capacity of System Resources
User Manual References
1.2.1 Basic Calling
1.30.1 TIE Line Service
Feature Guide 297