Direct In Line (Dil) - Panasonic KX-TDA30 Features Manual

Hide thumbs Also See for KX-TDA30:

Table of Contents

1.1 Incoming Call Features

Direct In Line (DIL)

Provides automatic direction of an incoming trunk call to a preprogrammed destination. Each trunk has a

destination for each time mode (day/lunch/break/night).

[Method Flowchart]

The call is routed to the

CLI destination.

*: Calling Line Identification (CLI) Distribution:

If the CLI routing is enabled and the caller's identification number is assigned in the Caller ID

Table, the call will not be routed to the DIL destination, but routed to the CLI destination.

[Programming Example of DIL Table]

The table can be programmed for each trunk.

Feature Guide

A trunk call is received.

Does the call have its CLI*

information and is CLI mode enabled

for the trunk and the time mode?

Is the CLI destination

Is the DIL destination of

the time mode assigned?

The call is routed to the

DIL destination.

The call is routed to the

operator (Intercept Routing

—No Destination).