Pt Programming - Panasonic KX-TDA100D Features Manual

2.3.2 PT Programming

2.3.2 PT Programming
Description
A PT user can perform the following programming:
a.
Personal Programming: Customising the extension according to his needs.
b.
System Programming: Customising the PBX according to organisational needs.
c.
Manager Programming: Customising specified frequently changing items (e.g., Charge Management and
Remote Extension Dial Lock).
Conditions
•
COS programming determines what programming can be performed:
–
System programming and personal programming
–
Personal programming only
–
No programming
•
The extension which is connected to the lowest numbered extension port can perform both personal
programming and system programming regardless of the COS.
•
The extension(s) assigned as the manager COS can perform manager programming.
•
During programming, the PT is considered to be busy.
•
Only one system programmer or one manager programmer is allowed to perform system or manager
programming at one time. The maximum number of simultaneous programmers that each PBX supports
is as follows:
–
one system programmer + 63 personal programmers
–
one manager programmer + 63 personal programmers
–
64 personal programmers
•
System Programming Password Level
To access system programming, a valid password must be entered. For more details, see Section
2.3.3 Password Security in this Feature Guide.
•
Personal Programming Data Default Set
A user can return all of the items programmed on the telephone to default.
PT Programming Manual References
2.1 PT Programming
[516] Programming Mode Limitation
Feature Guide References
2.2.1 Class of Service (COS)
2.2.6 Manager Features
3.1 Capacity of System Resources
User Manual References
3.1 Customising Your Phone (Personal Programming)
3.2 Manager Programming
3.3 Customising Your System (System Programming)
348 Feature Guide