Networking Features; Tie Line Service - Panasonic KX-TDA100D Features Manual

1.30.1 TIE Line Service

1.30 Networking Features

1.30.1 TIE Line Service
Description
A TIE line is a privately leased communication line between two or more PBXs, which provides cost effective
communications between company members at different locations. The TIE lines can be used to call through
the PBX to reach another switching system (PBX or telephone company). By using TIE lines, the PBX can
support not only communications with the public network but with other company members in the private
network where the PBX is included.
Interface
The following interfaces can be used to establish a private network:
Interface
E & M
T1 (TIE [E & M])
E1
BRI/PRI (QSIG)
VoIP
The available interfaces depend on the cards installed in the PBX.
Explanation
1.
Making a TIE Line Call
One of the following two methods can be used to make a TIE line call.
a.
Extension Number Method (Access without PBX Code)
Dial the [Extension Number] only.
[Example]
Extn.1011
Dials "3011".
Explanation:
To use this method, it is necessary to change the first one or two digits of extension numbers of either
PBX (e.g., 10XX for PBX-1, 20XX for PBX-2) to allow calls to be routed properly.
278 Feature Guide
Analogue
Digital (64 kbps ´ 24 channels)
Digital (64 kbps ´ 30 channels)
Digital (ISDN 2B+D/30B+D/23B+D)
Internet Protocol (IP)
PBX-1
TIE Line
Interface
Extn.1012
Dials "2011".
Network Type
PBX-2
TIE Line
Interface Interface
Extn. 2011
PBX-3
Interface
Extn. 3011