Fecc - Camera Control In Conference - Grandstream Networks GVC3200 User Manual

5. Search contacts in Skype and dial out.
6. The new call will be added to conference.
--------------------------------------------------------------------------------------------------------------------------------------------
Note:

When the call is mixed, GVC3200/GVC3202 and the remote party using the app can see video
from all parties. The remote SIP party can only see video from GVC3200/GVC3202. All parties
can hear each other.

For Skype application downloaded from GS Market only
GVC3200/GVC3202 supports video mixing so that the remote SIP party can receive video feed
from Skype. This currently only works when there is only one SIP/H.323 line in the call, and the
Skype application must be downloaded from GS Market on the GVC3200/GVC3202. Here are the
steps to use this feature:
1. GVC A establishes video call with another GVC B using SIP account.
2. On GVC A, during the SIP call, select More->Add third party and select Skype app.
3. On GVC A, establish Skype call with PC Skype client. Now the call is mixed.
4. If GVC A currently shows Skype app interface, press GVC A's remote control's BACK button
to exit this Skype app interface. This will enable Skype video mixing and a message "Skype
video mixing is on" will pop up on the screen. The user can then navigate to the normal SIP
call interface using the GVC remote control. On the remote party GVC B, the user will see the
mixed video of both Skype and GVC A.
5. If going back to the Skype call interface again, it will automatically disable Skype video mixing.
The remote party GVC B will see the video from GVC A only, instead of the mixed video.
6. Navigate as indicated in step 4 to enable Skype video mixing or step 5 to disable it.
----------------------------------------------------------------------------------------------------------------------------- ---------------

FECC - CAMERA CONTROL IN CONFERENCE

During the video call, if the local party (GVC3200/GVC3202) and remote party support FECC, the remote
camera can be controlled on the GVC3200/GVC3202.
Here is how to use FECC on the GVC3200/GVC3202 to control remote party's camera:
3. Make sure the GVC3200/GVC3202 and the remote party support FECC and it's enabled on both
parties. For GVC3200/GVC3202, FECC setting is under web UI->Settings->Account Settings->Codec:
"Enable FECC". If the remote party is another vendor's video device, please check the documentation
from the vendor to enable FECC.
Firmware Version 1.0.1.65 GVC3200/GVC3202 User Guide Page 76 of 145