Figure 32: Fecc - Remote Camera Control; End Conference - Grandstream Networks GVC3200 User Manual

4. Establish video call between GVC3200/GVC3202 and the remote party.
5. On the GVC3200/GVC3202 remote control, press the camera button
pops up on GVC3200/GVC3202 display device.
6. Use UP/DOWN/OK navigation keys on the GVC3200/GVC3202 remote control to select the remote
party, e.g., GVC-LAB in the above figure. This will bring up camera control interface.
7. On the GVC3200/GVC3202 remote control, press the navigation keys and zoom in/zoom out buttons
on trackpad to adjust remote camera.

END CONFERENCE

To end the conference, tap on END button
control to disconnect from the conference. If GVC3200/GVC3202 is the conference host, ending the
conference will disconnect all the members from the conference. If the conference member hangs up the
call, it will be disconnected from the conference, but other parties in the conference will stay in the
conference.
SCHEDULE
SCHEDULE feature allows users to set a specific time to host a conference in advance, with conference
reminder and members.
Firmware Version 1.0.1.65
Figure 32: FECC – Remote Camera Control
or press key
GVC3200/GVC3202 User Guide
and the following prompt
on GVC3200/GVC3202 remote
Page 77 of 145