Redial - Grandstream Networks GVC3200 User Manual

----------------------------------------------------------------------------------------------------------------------------- ---------------
Note:
1. By default, GVC3200/GVC3202 allows users to press # key as SEND key. This behavior can be
disabled via option "Use # as Dial Key" in web GUI->SIP Account->Call page.
2. When entering initials or full spellings of a name that exists in the contact, this contact will show up in
the dropdown list. For example, if the user inputs Amy by pressing the corresponding digits "2" (ABC),
"6" (MNO), "9" (WXYZ) on the remote control, Amy's name and number will be displayed in the list if it
exists in the contact, users can select it to dial out.
--------------------------------------------------------------------------------------------------------------------------------------------

REDIAL

Users can dial out the last dialed number if there is dialed call log. Access the dial screen, and then press
"#" key or on the remote control to dial out.
DIALING A NUMBER VIA CONTACT
Follow the steps below to dial a number via Contacts.
1. On the LCD display device, access Contacts by tapping on button
2. Navigate and select in the contacts entries using the remote control navigation keys.
3. Press on the remote control to dial out.
DIALING A NUMBER VIA CALL HISTORY
1. On the LCD display device, access Applications on home screen and access call history by selecting
.
icon
2. The LCD will display all call history types. Navigate in the call history list by selecting the call history
category. Select the call history entry you would like to dial out.
3. Press on the remote control to dial out.
Firmware Version 1.0.1.65 GVC3200/GVC3202 User Guide
on home screen.
Page 58 of 145