Figure 18: Gvc3200/Gvc3202 Add Preset Screen; Preset - Grandstream Networks GVC3200 User Manual

PRESET

ADD PRESET
Users can create and save maximum of 24 camera presets, with each preset storing the camera position
and focal length. Follow the steps below to add preset:
1. Access camera screen and press the red shortcut key on the remote control to access preset screen.
2. Select the preset window and press the blue shortcut key on the remote control to access the editing
screen.
3. Adjust camera position and zoom in/zoom out using the remote control.
4. On GVC3200/GVC3202 remote control, press "OK" key to save the preset, or press Back key
cancel.
EDIT PRESET
To edit an existing preset, press the blue shortcut key on the remote control to access the editing screen
to edit. The created preset can also be renamed by pressing the yellow shortcut key on the remote control
for better identification purpose.
Firmware Version 1.0.1.65

Figure 18: GVC3200/GVC3202 Add Preset Screen

GVC3200/GVC3202 User Guide
to
Page 51 of 145