Table 23: Gvc3200/Gvc3202 Ldap Settings Parameters; Figure 46: Ldap Contacts Interface - Grandstream Networks GVC3200 User Manual

LDAP SETTINGS
Before starting using LDAP on GVC3200/GVC3202, the users must configure the LDAP settings first.
Press the Blue shortcut key on the GVC3200/GVC3202 remote control to access LDAP settings, or the
users can configure it under GVC3200/GVC3202 web UI->Contacts->LDAP page.
Connection Mode
Server Address
Port
Base DN
User Name
Firmware Version 1.0.1.65

Figure 46: LDAP Contacts Interface

Table 23: GVC3200/GVC3202 LDAP Settings Parameters

It is used to select which protocol will be used for LDAP searching,
LDAP or LDAPS.
It is used to configure the URI of the LDAP (Lightweight Directory
Access Protocol) server.
It is used to configure the LDAP server port. The default LDAP port
number is 389.
It is used to configure the LDAP search base. This is the location in the
directory where the search is requested to begin.
Example:
dc=grandstream, dc=com
ou=Boston, dc=grandstream, dc=com
It is used to configure the bind "Username" for querying LDAP servers.
Some LDAP servers allow anonymous binds in which case the setting
can be left blank.
GVC3200/GVC3202 User Guide Page 98 of 145