Table 18: Gvc3200/Gvc3202 Add Conference Parameters; Figure 35: Gvc3200/Gvc3202 Add Conference Screen - Grandstream Networks GVC3200 User Manual

3. Fill in conference name, members, start time, conference duration and etc.
4. Press the yellow shortcut key on the remote control to save the scheduled conference.
Parameters Descriptions
Title It is used to set the conference name to identify this conference.
Click on button
Members
member or a group of members. Press the yellow key on the remote control to save
and go back to schedule screen. Up to 8 members can be added.
Start Time It is used to configure the start time of the conference.
End Time It is used to configure the end time of the conference.
It is used to configure whether to remind users in advanced. A prompt dialog box will
Reminder Time
pop up on GVC3200/GVC3202 screen 10 minutes before the conference starts.
Auto Join
It is used to configure whether PIN code is required when the scheduled members
Conference for
join the conference. If enabled and the scheduled conference has PIN code
Scheduled
configured, the scheduled members will automatically answer the call without PIN
Members without
code required.
PIN Code
Firmware Version 1.0.1.65

Figure 35: GVC3200/GVC3202 Add Conference Screen

Table 18: GVC3200/GVC3202 Add Conference Parameters

to access the Add Member screen. Users can add one
GVC3200/GVC3202 User Guide Page 80 of 145