File Manager - Grandstream Networks GVC3200 User Manual

FILE MANAGER

File Manager allows users to delete, move, copy, paste, send, rename files (including files on storage
device such as USB flash drive and SD card), and query file properties on GVC3200/GVC3202.
COPY FILE
To copy the file from GVC3200/GVC3202 to USB/SD storage device:
1. Insert USB/SD storage device into USB port on GVC3200/GVC3202. It will take a few seconds for
GVC3200/GVC3202 to prepare the connection.
2. The USB storage icon will show up on the status bar.
3. Go to Home screen->Applications->File Manager.
4. Open the target folder.
5. Press the yellow shortcut key and select the file.
6. Press the blue shortcut key to copy file and press
7. Select target storage device and go to the directory where the file will be pasted to.
8. Press the yellow shortcut key to paste the file.
Users can also select file and press the blue shortcut key to copy one single file or folder.
SEND FILE
1. Go to Home screen->Applications->File Manager.
2. Open the target folder.
3. Press the yellow shortcut key and select the file.
4. Press MENU key
5. Select target location and press "OK" key on GVC3200/GVC3202 remote control to send file. If users
need to send the file via Bluetooth, enable and connect Bluetooth device first. Otherwise, the
interface will be redirected to the corresponding setting page to configure.
Users can also select file and press the MENU key to send one single file or folder.
DELETE FILE
1. Go to Home screen->Applications->File Manager.
Firmware Version 1.0.1.65
on GVC3200/GVC3202 remote control and select "Send" option.
GVC3200/GVC3202 User Guide
to go back to the upper level directory.
Page 107 of 145