Oled Screen; Using The Led Indicator; Table 8: Gvc3200/Gvc3202 Oled Screen Status Descriptions - Grandstream Networks GVC3200 User Manual


Single click the left key of the USB mouse to perform the following operations:
 Access menu
 Check in the checkbox or enable/disable an option
 Bring up the drop-down list when clicking on a combo box
 Switch input methods in the input box, tap on the corresponding buttons on the soft keyboard to
input characters

Double left click
method.

Single click the right key of the USB mouse to exit the current displayed menu. It will go back to the
previous menu without saving the configurations.

OLED SCREEN

OLED Screen Status
Booting
IP
Call Status
Upgrade Status
Sleep Mode
Abnormal Status

USING THE LED INDICATOR

GVC3200/GVC3202 LED indicator is located next to the OLED. It can be used to notify the users with
Firmware Version 1.0.1.65
on the soft keyboard can switch to "Always use upper case" in English input

Table 8: GVC3200/GVC3202 OLED Screen Status Descriptions

Descriptions
Display "BOOTING..." when GVC3200/GVC3202 boots up.
Display GVC3200/GVC3202 IP address. For example, IP:
192.168.40.5.
Display "Ringing", "Calling", "Talking", "Call Waiting", "Missed
Call", "New Voicemail" and etc.

Display "New Version" when a new firmware version is
detected.

Display "Upgrading" in the process of upgrading.

Display failure reason when upgrade fails. For example,
"Incompatible
Version", etc.
When the device is in sleep mode, the OLED shows "Standby".
It is used to display abnormal status information. The
hexadecimal error code will be displayed next to the abnormal
status.
GVC3200/GVC3202 User Guide
Hardware", "Insufficient Space", "Same
Page 36 of 145