Figure 14: Gvc3200/Gvc3202 Bluetooth - Paired Device; Using Bluetooth Remote Control - Grandstream Networks GVC3200 User Manual

Figure 14: GVC3200/GVC3202 Bluetooth - Paired Device

If the connection is lost between the Bluetooth device and GVC3200/GVC3202, go to LCD menu-
>Settings->Network->Bluetooth and click on the device name under "Paired devices" again to reconnect.

USING BLUETOOTH REMOTE CONTROL

Users could use GVC3200/GVC3202 Bluetooth remote control that comes with the GVC3200/GVC3202
packaging to control and configure the GVC3200/GVC3202. When the GVC3200/GVC3202 boots up for
the first time, a setup wizard will guide the users to pair and connect the remote control to the
GVC3200/GVC3202. When the remote control is connected to GVC3200/GVC3202, users will see
icon on the top status bar of the LCD display device.
If the user happens to reset the GVC3200/GVC3202, or replace the remote control, the user will need pair
and connect remote control to the GVC3200/GVC3202 again. Please follow the steps below:
1. Connect a USB mouse or open the virtual remote control after logging in GVC3200/GVC3202 web UI.
2. On the LCD display device, go to Settings->Network->Bluetooth.
and click
3. Select "Search for devices".
4. On the remote control you would like to pair with GVC3200/GVC3202, press "OK" and digit 5 keys at
the same time for about 5 seconds.
Firmware Version 1.0.1.65 GVC3200/GVC3202 User Guide Page 45 of 145