Technical Data; Sirolaser Advance Specification - Sirona SiroLaser advance Operating Instructions Manual

System description

Technical Data

empty
empty
empty
20
3.4
Technical Data
Technical Data SIROLaser Advance
General
Beam guide:
Display:
Cooling:
Temperature switch:
Door contact connection: Potential-free contact 5 VDC/20 mA (TTL)
Dimensions (W x L x H):
Weight:

SIROLaser Advance specification

Laser type:
Wavelength:
Laser system:
Device classification:
Optical power:
Optical peak power:
Emission modes:
Pulse:
Pulse duration:
IP degree of protection:
Aiming beam:
NOHD:
Optical fiber thickness:
Operation:
Nominal power input:
Insulation class:
Adapter:
Power supply:
Technical Data optical fiber
Sirona Dental Systems GmbH
Operating Instructions SIROLaser Advance
Flexible quartz glass fiber
Full color, graphical LCD touch screen
Internal air cooling controlled by output
Software temperature switch at 48° C
182 x 197 x 189 mm
approx. 1300 g (incl. handpiece and
rechargeable battery)
Diode laser
970 nm ± 15 nm
Class IV (according to IEC 60825-1)
Class IIb (according to Council Directive 93/
42/EEC)
approx. 0.5 - 7.0 W (CW)
approx. 14 W (diode)
CW (continuous wave),
chopped 1 Hz to 10 kHz,
peak-pulse approx. 1.5 kHz - 20 kHz
repeated pulse
Chopped mode: 10 µs - 0,99 sec.
Peak-pulse: 23 µs fixed
Laser unit: IP20; wireless foot control: IPX5
(according to EN IEC 60601-1)
635 - 650 nm, max. 1 mW
From the distal end of the optical fiber: 1.5 m
200 and 320 µm
Electrical wireless foot control or finger
switch, with electronic access key
15 V DC 6.66 A max. 100 VA MPU100-106
Class I, type B (according to IEC 60601-1)
External, 100 - 240 VAC, 50 - 60 Hz
The SIROLaser Advance may only be
operated with the Sinpro MPU100-106
power supply.
D3545.201.01.08.02 08.2012
62 60 504 D3545