Sirona Dental Systems Gmbh - Sirona SiroLaser advance Operating Instructions Manual

Sirona Dental Systems GmbH

Operating Instructions SIROLaser Advance
External calibration check:
1 Watt level is being
checked when laser beam
is directed to the power
meter and finger switch is
pressed for three seconds.
Confirmation via 'OK'.
To perform any calibration
check it is advised to read
the user manual carefully.
Confirmation via 'OK'.
For informations of the
calibration check, see
chapter "Calibration check"
[ ➙ 46].
62 60 504 D3545
D3545.201.01.08.02 08.2012
External calibration check:
3 Watt level is being
checked when laser beam
is directed to the power
meter and finger switch is
pressed for three seconds.
Confirmation via 'OK'.
Confirmation if link shall be
deleted from 'Favorites'. To
be confirmed via 'OK' or
returned to previous screen
via 'Cancel'.
External calibration check:
5 Watt level is being
checked when laser beam
is directed to the power
meter and finger switch is
pressed for three seconds.
Confirmation via 'OK'.
Confirmation if link shall be
deleted from 'My
Settings'.To be confirmed
via 'OK' or returned to
previous screen via
'Cancel'.
Operation
Main home screen
External calibration check:
7 Watt level is being
checked when laser beam
is directed to the power
meter and finger switch is
pressed for three seconds.
Confirmation via 'OK'.
Wrong pin code was
entered. Please try again
after confirmation via 'OK'.
55