Optical Fibers Specification; Transport And Storage; Sirona Dental Systems Gmbh - Sirona SiroLaser advance Operating Instructions Manual

Sirona Dental Systems GmbH

Operating Instructions SIROLaser Advance
empty
empty
62 60 504 D3545
D3545.201.01.08.02 08.2012

Optical fibers specification

Optical fiber diameters:
Core diameter:
Cladding diameter:
Coating diameter:
All diameters ± 20%
Optical fiber length:
Minimum transmission
efficiency at related
wavelength:
Maximum transmission
power:
Numerical aperture:
Tensile strength:
Technical Data wireless foot control
Wireless foot control
Frequency:
Transmitting power:
Modulation type:
Battery:

Transport and storage

The SIROLaser Advance comes in a cardboard box that ensures proper
and easy transport.
CAUTION
Do not leave the SIROLaser Advance in a vehicle parked in the sun. The
inside temperature of the car could thus heat up to a point where
individual components may be damaged.
Appropriate storage, Sirona
To ensure appropriate storage, the device must always be kept in the box
supplied by Sirona Dental Systems.
Thus stored, the SIROLaser Advance can withstand the following
ambient conditions:
● Temperatures from -40° C to +70° C
● Relative humidity from 10% to 90%
● Atmospheric pressure from 800 hPa to 1060 hPa
Battery must be charged NOTICE
The rechargeable battery must be fully charged regularly. After six
months of no charging (storage) the rechargeable battery might lose its
loading capacity and might not be rechargeable anymore.
200 µm fiber 320 µm fiber
200 µm 320 µm
240 µm 385 µm
270 µm 408 µm
200 µm fiber: 170 ± 30 mm
320 µm fiber: 160 ± 30 mm
The optical fiber material has an attenuation
of around 1 dB/km @970 nm
100 kW/mm² (Nd:YAG, cw at 1060 nm)
≥ 0.22
70 kpsi
2.4 GHz - 2.4835 GHz (ISM band)
< 2 mW (short-range device)
Multi-dimensional Multi Access (MDMA)
Type AAA, 1.5 V
System description
Technical Data
21