Table of Contents
Advertisement
is insufficient.
Smoothing:
It refers to the smoothness of the stream. The higher value of the smoothing, the
better fluency of the stream, though, the video quality may not be so satisfied. The
lower value of the smoothing, the higher quality of the stream, though it may
appear not fluent.
4. Click Save to save the settings.
5.4.2 Configuring Audio Settings
Steps:
1. Enter the Audio Settings interface
Configuration > Basic Configuration > Video/Audio > Audio
Or Configuration > Advanced Configuration > Video/Audio > Audio
2. Configure the following settings.
Note:
Audio settings vary according to different camera models.
Audio Encoding: G.722.1, G.711 ulaw, G.711alaw, G.726, MP2L2, AAC and
PCM are selectable. For MP2L2, the sampling rate and audio stream bitrate are
configurable; for PCM, the sampling rate can be set.
Audio Input: MicIn and LineIn are selectable for the connected microphone and
pickup respectively.
Input Volume: 0-100
Environmental Noise Filter: Set it as OFF or ON. When the function is enabled,
the noise in the environment can be filtered out to some extent.
Thermometric Network Bullet Camera User Manual
Figure 5-26 Audio Settings
53
Advertisement
Table of Contents
