Configuring Audio Settings - HIKVISION DS-2DE3204W-DE User Manual

User Manual of Network Mini PTZ Camera
quality throughout.
Max. Bitrate:
Set the max. bitrate to 32~16384 Kbps. The higher value corresponds to the
higher video quality, and the higher bandwidth is required as well.
Video Encoding:
The Video Encoding standard can be set to H.264 or MJPEG.
I Frame Interval:
Set the I-Frame interval from 1 to 400.
SVC:
SVC is a video encoding technology. It extracts frames from the original video and
sends these frames to a video recorder which also supports SVC function when
the network bandwidth is insufficient.
4. Click

7.4.2 Configuring Audio Settings

Steps:
1. Enter the Audio Settings interface
Configuration > Basic Configuration > Video / Audio > Audio
Or Configuration > Advanced Configuration > Video / Audio > Audio
2. Configure the following settings.
Audio Encoding: G.722.1, G.711ulaw, G.711alaw, MP2L2 and G.726.
Sampling Rate: When the Audio Encoding is selected as MP2L2, you can
configure the Sampling Rate in the dropdown list. The greater the value is, the
better the audio quality will be.
Audio Stream Bitrate: When the Audio Encoding is selected as MP2L2, you can
configure the Audio Stream Bitrate in the dropdown list. The greater the value is,
the better the audio quality will be.
Audio Input: When an intercom is connected to the PTZ camera, you need to set
this option to LineIn. When a microphone is connected to the PTZ camera, you
© Hikvision
to save the settings.
Figure 7-27 Audio Settings
68