HIKVISION UD02330B User Manual page 107

3. Select the type of IP Address Filter in the drop-down list, Forbidden and Allowed
are selectable.
4. Set the IP Address Filter list.
 Add an IP Address
Steps:
(1) Click the Add to add an IP.
(2) Input the IP Adreess.
(3) Click the OK to finish adding.
 Modify an IP Address
Steps:
(1) Left-click an IP address from filter list and click Modify.
(2) Modify the IP address in the text filed.
(3) Click the OK to finish modifying.
 Delete an IP Address
Left-click an IP address from filter list and click Delete.
Delete all IP Addresses

Click Clear to delete all the IP addrsses.
5. Click Save to save the settings.
Thermometric Network Bullet Camera User Manual
Figure 9-8 Add an IP
Figure 9-9 Modify an IP
107