HIKVISION UD02330B User Manual page 96

increase/decrease of the sound intensity are detected.
Besides configuring the recording schedule, you have to configure the
settings on the Audio Exception Detection interface. Refer to Section 5.6.6
for detailed information.

Record Triggered by VCA Recording
If you select VCA Recording, the video will be recorded when the VCA
detects series of suspicious behaviors, such as line crossing, intrusion, region
entrance and region exiting.
Besides configuring the recording schedule, you have to configure the Rule
setting on VCA Configuration interface. Refer to Section 5.7.2 for detailed
information.

Record Triggered by Fire Source Detection
If you select Fire Source Detection, the video will be recorded when fire
source is detected.
Besides configuring the recording schedule, you have to configure the
settings on the Dynamic Fire Source Detection interface. Refer to Section
5.6.7 for detailed information.

Record Triggered by All Events
If you select All Events, the video will be recorded when any of the
above-mentioned events happens.
Besides configuring the recording schedule, you have to configure the
settings on corresponding event interfaces.
(3) (Optional) Check the checkbox of Select All and click Copy to copy settings
of this day to the whole week. You can also check any of the checkboxes
before the date and click Copy.
(4) Click OK to save the settings and exit the Edit Record Schedule interface.
6. Click Save to save the settings.
Thermometric Network Bullet Camera User Manual
96