Table of Contents
Advertisement
Thermometric Network Bullet Camera User Manual
(4) Enter the User Name and Password registered on the DynDNS website.
(5) Click Save to save the settings.
IP Server:
Steps:
(1) Enter the Server Address of the IP Server.
(2) Click Save to save the settings.
Note:
For the IP Server, you have to apply a static IP, subnet mask, gateway and
preferred DNS from the ISP. The Server Address should be entered with the
static IP address of the computer that runs the IP Server software.
Note:
For the US and Canada area, you can enter 173.200.91.74 as the server
address.
NO-IP:
Steps:
(1) Choose the DDNS Type as NO-IP.
Figure 5-10 DynDNS Settings
Figure 5-11 IPServer Settings
38
Advertisement
Table of Contents
