Handling Exception; Configuring Audio Exception Detection - HIKVISION UD02330B User Manual

Thermometric network bullet camera

Table of Contents

5.6.5 Handling Exception

The exception type can be HDD full, HDD error, network disconnected, IP address

conflicted and illegal login to the cameras.

Steps:

1. Enter the Exception Settings interface:

Configuration > Advanced Configuration> Basic Event > Exception

2. Check the checkbox to set the actions taken for the Exception alarm. Refer to

Task 3 Set the Alarm Actions Taken for Motion Detection in Section 5.6.1.

3. Click Save to save the settings.

Purpose:

Audio exception detection function detects the abnormal sounds in the surveillance

scene, such as the sudden increase/decrease of the sound intensity, and some certain

actions can be taken when the alarm is triggered.

Note:

Audio exception detection function varies according to different camera

models.

Steps:

1. Enter the Audio Exception Detection settings interface:

Configuration > Advanced Configuration> Smart Event> Audio Exception

Detection

2. Check the checkbox of Audio Loss Exception to enable the audio loss detection

Thermometric Network Bullet Camera User Manual

Figure 5-44 Exception Settings

Table of Contents