Table of Contents
Advertisement
(1)Click Edit to edit the arming schedule. The Figure 6-34 shows the editing
interface of the arming schedule.
(2)Choose the day you want to set the arming schedule.
(3)Click
to set the time period for the arming schedule.
(4)(Optional) After you set the arming schedule, you can copy the schedule to
other days.
(5)Click OK to save the settings.
The time of each period can't be overlapped. Up to 8 periods can be
Note:
configured for each day.
Task 3: Set the Alarm Actions for Motion Detection.
Check the checkbox to select the linkage method. Notify surveillance center, send
email, upload to FTP, trigger channel and trigger alarm output are selectable. You can
specify the linkage method when an event occurs.
Thermometric Network Bullet Camera User Manual
Figure 5-38 Arming Time Schedule
66
Advertisement
Table of Contents
