Table of Contents
Advertisement
●
To initialize and use the SD card after insert it to the camera, please refer to the
steps of NAS disk initialization.
6.3 Configuring Recording Schedule
Purpose:
There are two kinds of recording for the cameras: manual recording and scheduled
recording. For the manual recording, refer to Section 4.3 Recording and Capturing
Pictures Manually. In this section, you can follow the instructions to configure the
scheduled recording. By default, the record files of scheduled recording are stored in
the SD card (if supported) or in the network disk.
Steps:
1. Enter the Record Schedule Settings interface:
Configuration > Advanced Configuration> Storage > Record Schedule
2. Check the checkbox of Enable Record Schedule to enable scheduled recording.
3. Set the record parameters of the camera.
Thermometric Network Bullet Camera User Manual
Figure 6-6 Recording Schedule Interface
92
Advertisement
Table of Contents
