●
Expert Configuration
Expert mode is mainly used to configure the sensitivity and proportion of object on
each area for different day/night switch.
Note:
Day/night switch can't be realized for thermal camera channel. But Area,
Sensitivity and Proportion of Object on Area are still configurable.
Figure 5-40 Expert Mode of Motion Detection
5.6.2 Configuring Video Tampering Alarm
Purpose:
You can configure the camera to trigger the alarm when the lens is covered and take
some certain alarm response actions.
Steps:
1. Enter the video tampering Settings interface:
Configuration > Advanced Configuration > Basic Event > Video Tampering
Thermometric Network Bullet Camera User Manual
68