Maintenance; Rebooting The Camera; Restoring Default Settings - HIKVISION UD02330B User Manual

9.7 Maintenance

9.7.1 Rebooting the Camera

Steps:
1. Enter the Maintenance interface:
Configuration > Basic Configuration> System > Maintenance
Or Configuration > Advanced Configuration> System > Maintenance
2. Click Reboot to reboot the network camera.

9.7.2 Restoring Default Settings

Steps:
1. Enter the Maintenance interface:
Thermometric Network Bullet Camera User Manual
Figure 9-11 Device Information
Figure 9-12 Reboot the Device
109