Activating The Camera - HIKVISION UD02330B User Manual

 Refer to the Figure 2-2 to set network camera over the LAN via a switch or a
router.
Figure 2-2 Connecting via a Switch or a Router

2.1.2 Activating the Camera

You are required to activate the camera first by setting a strong password for it before
you can use the camera.
Activation via Web Browser, Activation via SADP, and Activation via Client Software
are all supported.

Activation via Web Browser
Steps:
1. Power on the camera, and connect the camera to the network.
2. Input the IP address into the address bar of the web browser, and click Enter to
enter the activation interface.
Notes:

The default IP address of the camera is 192.168.1.64.

For the camera enables the DHCP by default, you need to activate the camera via
SADP software. Please refer to the following chapter for Activation via SADP.
Thermometric Network Bullet Camera User Manual
Figure 2-1 Connecting Directly
12