HIKVISION UD02330B User Manual page 56

1. Enter the Display Settings interface:
Configuration > Basic Configuration> Image> Display Settings
Or Configuration > Advanced Configuration> Image> Display Settings
2. Set the image parameters of the camera.
Figure 5-28 Configuring Display Settings for Camera 2
•
Image Adjustment
Brightness describes bright of the image, which ranges from 1~100, and the
default value is 50.
Contrast describes the contrast of the image, which ranges from 1~100, and
the default value is 50.
FFC (Flat Field Correction) improves the quality in digital imaging. It can
remove artifacts from 2-D images that are caused by variations in the
pixel-to-pixel sensitivity of the detector or by distortions in the optical path.
Schedule, Temperature, and OFF are selectable.
 Schedule: You can select the correction interval among 10, 20, 30,
40, 50, 60, 120, 180, and 240minutes.
 Temperature: Camera adjusts the image according to the
temperature.
Manual Background Correction: Fully cover the lens with an object (lens
Thermometric Network Bullet Camera User Manual
56