Oracle SPARC T7-2 Installation Manual page 38

Install the CMA
Note -
step if you need to reinstall cable hooks and straps on the CMA.
For best results, place three cable straps, evenly spaced, on the rear-facing side of the CMA, and
three cable straps on the side of the CMA nearest the server.
No.
1
2
Related Information
"Verify Operation of Slide Rails and CMA" on page 39
■
"Secure Cables to the CMA" on page 52
■
38 SPARC T7-2 Server Installation Guide • March 2016
Cable hooks and loop straps are preinstalled on the CMA. Perform the procedure in this
Description
CMA cable strap
CMA arm