Identifying Ports; Usb Ports - Oracle SPARC T7-2 Installation Manual

Identifying Ports

SP NET MGT port
■
At least one system on-board Ethernet network port
■
Power cables to the power supply inlet ports
■
Related Information
"Connect the SER MGT Cable" on page 48
■
"Connect the NET MGT Cable" on page 49
■
"Connect Ethernet Network Cables" on page 50
■
"Prepare the Power Cords" on page 53
■
Identifying Ports
These topics provide the pin descriptions of the ports.
"Rear Panel Components (Installation)" on page 13
■
"USB Ports" on page 42
■
"SER MGT Port" on page 43
■
"NET MGT Port" on page 45
■
"Gigabit Ethernet Ports" on page 46
■
"VGA Port" on page 47
■
Related Information
"Server Overview" on page 10
■
"Front Panel Components (Installation)" on page 12
■
"Rear Panel Components (Installation)" on page 13
■
"Cabling Requirements" on page 41
■

USB Ports

Two USB 3.0 ports can be accessed from the rear of the server and two USB 2.0 ports from the
front. See the location of the USB ports at
and "Rear Panel Components (Installation)" on page
You can connect and disconnect USB cables and peripheral devices while the server is running,
without affecting server operations.
Each USB port supplies 5V output at 500 mA.
42 SPARC T7-2 Server Installation Guide • March 2016
"Front Panel Components (Installation)" on page 12
13. The USB ports support hot-plugging.