Vga Port - Oracle SPARC T7-2 Installation Manual

Pin Signal Description
4 Transmit/Receive Data 2 +
Related Information
"Rear Panel Components (Installation)" on page 13
■
"Connect Ethernet Network Cables" on page 50
■

VGA Port

The server has two VGA video ports, one port on the front and one on the rear panel.
See "Front Panel Components (Installation)" on page 12
(Installation)" on page 13.
Only one of the two ports can be used at a time. The rear VGA port is disabled by
Note -
default. To enable the rear port and disable the front port, you must enable the Oracle ILOM
VGA_REAR_PORT policy: ->
The cable length used to connect between the monitor and the VGA port should not be
Note -
over 6 meters.
Pin Signal Description
1 Red Video
2 Green Video
3 Blue Video
4 Monitor ID - Bit 2
5 Ground
6 Red Ground
Pin
8
set /SP/policy VGA_REAR_PORT=enabled
Pin
9
10
11
12
13
14
Signal Description
Transmit/Receive Data 3 –
and "Rear Panel Components
.
Signal Description
[KEY]
Sync Ground
Monitor ID - Bit 1
VGA 12C Serial Data
Horizontal Sync
Vertical Sync
Connecting the Server Cables
Identifying Ports
47