Oracle Ilom System Console - Oracle SPARC T7-2 Installation Manual

4. (Optional) You can execute other Oracle ILOM commands while the server
initializes.
a. To display the Oracle ILOM prompt, press the #. (Hash+Dot) keys.
To see information about available Oracle ILOM commands, type:
b.
To see information about a specific command, type help command-name
To return to displaying host output from the server initialization, type:
c.
-> start /HOST/console
Continue with the installation by installing the OS.
5.
See "Configure the Preinstalled OS" on page
Related Information
"Connect the SER MGT Cable" on page 48
■
"Oracle ILOM System Console" on page 57
■
"Configure the Preinstalled OS" on page 58
■
"Reach a State to Install a Fresh OS (Oracle ILOM CLI)" on page 59
■
"Reach a State to Install a Fresh OS (Oracle ILOM Web Interface)" on page 61
■

Oracle ILOM System Console

When you power on the system, the boot process begins under the control of the Oracle ILOM
system console. The system console displays status and error messages generated by firmware-
based tests that are run during system startup.
Note -
SER MGT before applying power to the server.
After the system console finishes its low-level system diagnostics, the SP initializes and runs a
suite of higher level diagnostics. When you access the SP using a device connected to the SER
MGT port, you see the output of the Oracle ILOM diagnostics.
By default, the SP configures the NET MGT port automatically, retrieving network
configuration settings using DHCP and allowing connections using SSH.
For a more detailed discussion on configuring the system console and connecting terminals,
refer to the administration guide for your server.
To see these status and error messages, connect a terminal or terminal emulator to the
58.
Powering On the Server for the First Time
Oracle ILOM System Console
help
57