Assigning A Static Ip Address To The Sp; Log In To The Sp (Ser Mgt Port) - Oracle SPARC T7-2 Installation Manual

Assigning a Static IP Address to the SP

Parameter
Time Zone (Continent)
Time Zone (Country or Region)
Time Zone
Date and Time
root Password
Related Information
Oracle Solaris OS documentation
■
"Configure the Preinstalled OS" on page 58
■
"Reach a State to Install a Fresh OS (Oracle ILOM CLI)" on page 59
■
"Reach a State to Install a Fresh OS (Oracle ILOM Web Interface)" on page 61
■
Assigning a Static IP Address to the SP
If your network does not use DHCP, the NET MGT port is not operational until you configure
network settings for the service processor.
Note -
on the SP using the SER MGT port to configure the NET MGT port for your network. See
"Assign a Static IP Address to the NET MGT Port" on page
"Log In to the SP (SER MGT Port)" on page 64
■
Related Information
"Oracle ILOM System Console" on page 57
■
"Log In to the SP (SER MGT Port)" on page 64
■
"Oracle Solaris OS Configuration Parameters" on page 63
■
"Assign a Static IP Address to the NET MGT Port" on page 66
■

Log In to the SP (SER MGT Port)

After the SP boots, access the Oracle ILOM CLI to configure and manage the server. The
Oracle ILOM CLI prompt (->) is displayed the first time the SP is booted. The default
64 SPARC T7-2 Server Installation Guide • March 2016
Description
Select your continent.
Select your country or region.
Select the time zone.
Accept the default date and time, or change the values.
Type the root password twice. This password is for the superuser account for the Oracle Solaris OS
on this server. This password is not the SP password.
If you are unable to use DHCP on your network, you must connect to the Oracle ILOM
66.