General; Selection Of Language; Normal Operation; Extended Operation - Swegon COMPACT Air Operation And Maintenance Instructions

5.2 General

The main menu is normally shown if no other menu has
been selected.
The display automatically returns to the main menu after
30 minutes.
The content in the menu changes depending on the
operating mode selected, other functions that affect the
present operating mode and possible tripped alarms.

5.3 Selection of Language

When the air handling unit is started up for the first time,
a language selection menu is displayed. Select the appro-
priate language.
If you want to change language at a later opportunity – or
if you've selected the wrong language – you can change
the language at INSTALLATION LEVEL under CONTROL
DISPLAY. See Section 14.1.

5.4 Normal Operation

NORMAL OPERATION is highlighted in the display when
the air handling unit is operated in the selected operat-
ing mode under Main Menu 2. Alternatives to operation
are: stop (appears alternately in the menu when selected),
auto operation, manual low speed or manual high speed
operation, see Section 6.2.
The type of operation selected can be checked under Main
Menu 2.
Normal operation indicates that the air handling unit is not
being operated in any of the time-limited manually acti-
vated functions. See Sections 5.5, 5.6, 5.7 and 5.8.

5.5 Extended operation

When EXTENDED OPERATION has been activated, the
unit operates in the high speed airflow mode preset under
User Level, see Section 7.2.
For particulars of the times for extended operation, see
Section 9.5.2.
The function can be cancelled by pressing the escape
button on the control display and then selecting Normal
Operation.

5.6 Airing

When AIRING is activated, the unit operates in the max
speed airflow mode preset under User Level, see Section
7.2.
For particulars on how to set the appropriate supply air
temperature and period for airing, see Section 9.2.2.
The function can be cancelled by pressing the escape
button on the control display and then selecting Normal
Operation.
10 www.swegon.com

5.7 Heating

(applies to COMPACT Heat only)

The COMPACT Heat can be used for heating the room.
When HEATING is activated, the electric air heater (7.5
kW) heats up the air. A change-over damper in the lower
section of the air handling unit is reset and the air is led to
the air discharge outlets at the bottom of the unit. The air
is discharged at high velocity and follows the floor surface
by means of the so-called coanda effect. This enables long
throw lengths and quickly heats the entire premises.
The function can also be manually selected under HEAT-
ING. The air handling unit then operates According to the
preset conditions and times, see Section 9.2.6.
The function can be cancelled by pressing the escape
button on the control display and then selecting Normal
Operation.
5.8 Heating + Recirculation
(applies to COMPACT Heat only)
The COMPACT Heat can be used for heating the room.
When the HEATING + RECIRC. function is activated, the
extract air fan and the heat exchanger are switched off.
The damper in the air recirculation section is reset and
room air is circulated. The louvre damper for exhaust air
closes to prevent any cold down draught.
The electric air heater (7.5 kW) heats up the air. A change-
over damper in the lower section of the air handling unit
is reset and the air is led to the air discharge outlets at the
bottom of the unit. The air is discharged at high velocity
and follows the floor surface by means of the so-called
coanda effect. This enables long throw lengths and quickly
heats the entire premises.
When HEATING + RECIRC. is activated the air handling
unit operates according to the preset conditions and
times, see Section 9.2.6.
The function can be cancelled by pressing the escape
button on the control display and then selecting Normal
Operation.

5.9 Main Menu 2

You can access to Main Menu 2 by highlighting >> the
line farthest down and acknowledge by pressing the Enter
button.
Enter the code. (Factory-preset code: 1110) The code can
be changed under Service Level.
Registered design. The company reserves the right to make design changes without prior notice.
GB.COMPACTAHSK.210520