Table of Contents
Advertisement
Button(s)
Meaning
Adjusts blower speed
- +
(centre buttons)
Air to the windows
Air from the dashboard outlets
Air to the footwells
The
,
and
buttons (which regulate air distribution) can either be
selected individually or in combination.
Automatic mode
AUTO
Standard setting for all seasons.
Switching on automatic mode
– Select a temperature between +18 °C (64 °F) and +29 °C (86 °F).
– Press the
AUTO
button
The automatic mode maintains a constant temperature inside the vehicle and
dehumidifies the air. Air temperature, air delivery and air distribution are
regulated automatically to reach the desired interior temperature as quickly
as possible, and then to maintain this temperature. The system automatically
compensates for any variations in the outside temperature and for the effect
of direct sunlight.
The automatic temperature regulation only operates at temperature settings
between +18 °C and +29 °C. If a temperature below +18 °C is selected, LO
appears on the display. If a temperature is selected which is higher than
+29 °C, the display will show HI. In the maximum and minimum settings, the
climate control operates continuously with maximum cooling or heating
Safety First
⇒ page 164, fig.
141.
Operating Instructions
output and the temperature is not regulated automatically. The temperature
is not regulated.
Note
By keeping the
button on the driver side pressed for several seconds,
AUTO
the temperature of the passenger side can be set to the temperature of the
driver side or vice versa. The display indicates the new temperature value.
Selecting the temperature
Separate temperatures can be selected for the driver and
front passenger sides.
– Press the
-
or
+
buttons below the displays
fig. 141
until the desired temperature is selected for the driver
side or front passenger side.
The currently selected temperature setting is shown in the display above the
buttons.
By keeping the
button on the driver side pressed for several seconds,
AUTO
the temperature of the passenger side can be set to the temperature of the
driver side or vice versa. The display indicates the new temperature value. The
previous temperature setting can be restored by resetting the display on the
driver or passenger side as required.
Practical Tips
Air conditioning
- +
⇒ page 164,
Technical Specifications
165
Advertisement
Table of Contents
