Table of Contents
Advertisement
Changing the side light bulb (outside of vehicle)
The procedure for changing the bulb is the same on both
sides.
Safety First
Fig. 210 Side light bulb
(outside of vehicle)
Fig. 211 Side light bulb
(outside of vehicle)
Operating Instructions
– Switch off the ignition and the lights.
– Raise the bonnet.
⇒ fig. 210
– Move the brace
remove the rigid cover, separating the brace side and then
removing the two tabs from the other end of the cover.
– Gently press on the bulb holder tabs
cover upwards (it can also be removed by pulling on the bulb
holder wires).
– Separate the bulb from the bulb holder by pulling both pieces
anti-clockwise.
– Fit the new bulb by pressing on the bulb holder.
– Insert the bulb into the socket and press on the bulb holder. Fit
the cover, first inserting the side tabs and then closing the cover
and the brace. Make sure that the gasket sits well on the casing
cover during the operation.
– Check whether the new bulb is working.
Practical Tips
If and when
A
in the direction of the arrow and
1
⇒ fig. 211
and pull the
Technical Specifications
273
Advertisement
Table of Contents
