Table of Contents
Advertisement
Changing the DRL light bulb (daytime running light)
The procedure for changing the bulb is the same on both
sides.
– Switch off the ignition and the lights.
– Raise the bonnet.
– Turn the bulb holder anti-clockwise, pulling it by the grip
⇒ fig. 217
and removing the bulb holder and the bulb.
– Replace the blown bulb in the bulb holder (press and turn anti-
clockwise to remove) with a new bulb (press and turn clockwise
to insert).
– Installation is done in the reverse order.
Safety First
Fig. 217 DRL light
Operating Instructions
Note
Although it is not necessary, previously remove the rigid cover
fig. 220
for easier day light bulb changes.
Practical Tips
If and when
⇒ page 279,
Technical Specifications
277
Advertisement
Table of Contents
