Table of Contents
Advertisement
238
Checking and refilling levels
Changing windscreen wiper blades
If the windscreen wiper blades are in perfect condition, you
will benefit from an improved visibility. Damaged wiper
blades should be replaced immediately.
Removing the wiper blade
– Lift the wiper arm away from the windscreen.
– Slide the retainer catch on the wiper blade in the direction indi-
cated
– Pull the wiper blade
Fitting the wiper blade
– Slide back the retainer catch on the new wiper blade. The
mounting on the wiper blade should now be visible.
– Fit the new wiper blade into the mounting on the wiper arm
⇒ fig. 182
– Slide the retainer catch on the wiper blade in direction
it clicks into place on the wiper arm.
Fig. 181 Removing the
– Fold the wiper arm back down onto the glass.
wiper blade
If the windscreen wipers smear, they should be replaced if they are
damaged, or cleaned if they are soiled.
If this does not produce the desired results, the setting angle of the wind-
screen wiper arms might be incorrect. They should be checked by a qualified
workshop and corrected if necessary.
Do not drive unless you have good visibility through all windows!
•
The ignition must not be switched on while the front wiper arms are in
a raised position. The wipers would return to their park position and
damage the paintwork on the bonnet.
Fig. 182 Fitting the wiper
blade
⇒ fig. 181
A
. Hold onto the wiper blade at the same time.
A
A
out of its mounting on the wiper arm.
B
A
.
C
WARNING
A
so that
D
Advertisement
Table of Contents
