Table of Contents
Advertisement
Changing the main headlight bulb
The procedure for changing the bulb is the same on both
sides.
Safety First
Fig. 206 Main beam
headlights
Fig. 207 Main beam
headlights
Operating Instructions
– Switch off the ignition and the lights.
– Raise the bonnet.
– Pull up on the rubber cover
⇒ fig. 207
– Remove the connector
⇒ fig. 207
– Press the spring
– Remove the bulb. pulling it from the connection terminal and
fitting fit the replacement so that it sits correctly in the cut-out on
the reflector. To ensure correct lighting, the filament must be
vertical. When changing the bulb, you can check the position of
the bulb through the headlight glass.
– Installation is in reverse order, ensuring that the rubber cover is
well fitted to the housing.
– Check whether the new bulb is working.
– Have the headlight settings checked as soon as possible.
Practical Tips
If and when
A
⇒ fig. 206
to remove it.
A
A
from the bulb.
1
A
inwards and to the right.
2
Technical Specifications
271
Advertisement
Table of Contents
