Table of Contents
Advertisement
Changing bulbs
All bulbs can be changed easily in the bulb holder.
The bulbs are secured with a bayonet fastener. The table below
gives an overview of the bulb positions.
– Lightly press the defective bulb into the bulb holder, then turn it
to the left and remove it.
– Fit the new bulb, pressing it into the bulb holder and turn it to the
right as far as it will go.
– Use a cloth to remove any fingerprints from the glass part of the
bulb.
– Check whether the new bulb is working.
– Re-install the bulb holder ⇒ page 288.
Safety First
Fig. 236 Position of the
bulbs in the bulb holder.
Example: Tail lights on the
tailgate
Operating Instructions
Position of the bulbs
⇒ fig. 236
Pos.
Bulb function
A
Reverse lights
B
Rear side lights
C
Rear fog light
Changing bulbs. LED lamps
All bulbs can be changed easily in the bulb holder.
The bulbs are secured with a bayonet fastener. The table below
gives an overview of the bulb positions.
– Lightly press the defective bulb into the bulb holder, then turn it
to the left and remove it.
Practical Tips
If and when
Fig. 237 Position of the
bulbs in the bulb holder.
Example: Tail lights on the
tailgate
Technical Specifications
287
Advertisement
Table of Contents
