Table of Contents
Advertisement
62
Cockpit
Setting the minutes
– Keep pressing the
MODE
flashes.
– Use the
and
buttons to set the minutes.
+
-
Setting the date
– Keep pressing the
MODE
flashes.
– Use the
and
buttons to set the day.
+
-
– Keep pressing the
MODE
– Use the
and
buttons to set the month.
+
-
– Keep pressing the
MODE
– Use the
and
buttons to set the year.
+
-
Deactivating the date display
– Keep pressing the
MODE
flashes.
– Use the
-
button to disable the date display.
Activating the date display
– Keep pressing the
MODE
flashes.
– Use the
+
button to enable the date display.
When the display stops flashing, this means the setting you are performing
is completed and the time and date have been successfully stored.
button until the minutes display
button until the date display (day)
button until the month display flashes.
button until the year display flashes.
button until the complete date display
button until the complete date display
When the ignition is switched off, the odometer and the digital clock with
date display can be switched on for a few seconds by pressing the CHECK
⇒ page 59, fig. 37
A
button
.
8
Instrument lighting
The brightness of the instrument lighting can be adjusted as
required.
– Press the "+" button to increase the brightness of the instrument
lighting.
– Press the "-" button to reduce the brightness of the instrument
lighting.
The instrument lighting (dials and needles), the centre console illumination
and the illumination of the displays are regulated by a photodiode incorpo-
rated in the instrument panel, depending on the outside light.
Fig. 41 Instrument panel
lighting
Advertisement
Table of Contents
