Table of Contents
Advertisement
Opening the bonnet
Before opening the bonnet make sure that the windscreen wiper
arms are not lifted away from the glass. Otherwise the paint may be
damaged.
– Lift the bonnet slightly ⇒
– Press the release catch under the bonnet upwards
This will release the arrester hook under the bonnet.
– Open the bonnet.
The bonnet is held in position by a gas-filled strut.
Safety First
Fig. 176 Release catch
under the bonnet
.
⇒ fig.
176.
Operating Instructions
WARNING
Never open the bonnet if you see steam or drips of coolant being released
from the engine compartment. Failure to comply could result in burns. Wait
until no steam or coolant can be seen before opening the bonnet.
Work in the engine compartment
Extra caution is necessary when working on components in
the engine compartment.
Always be aware of the danger of injury and scalding as well as the risk of
accident or even fire when working in the engine compartment (e.g. when
checking and refilling fluids). Always observe the warnings listed below and
follow all general safety precautions. The engine compartment of the vehicle
is a potentially hazardous area ⇒
WARNING
•
Switch the engine off.
•
Remove the ignition key.
•
Apply the handbrake firmly.
•
If your vehicle is equipped with a manual gearbox, place the gear lever
in neutral. If you are driving an automatic vehicle, place the selector lever
in position P.
•
Wait for the engine to cool down.
•
Children should not be allowed to approach the engine compartment.
•
Never spill liquids used for vehicle operation on the engine compart-
ment, as these may catch fire (e.g. coolant).
•
Take care not to cause short circuits in the electrical system, especially
when working on the battery.
Practical Tips
Checking and refilling levels
Technical Specifications
229
Advertisement
Table of Contents
