Table of Contents
Advertisement
270
If and when
Changing the turn signal bulb
The procedure for changing the bulb is the same on both
sides.
– Switch off the ignition and the lights.
– Raise the bonnet.
– Turn the bulb holder anti-clockwise, pulling it by the grip
⇒ fig. 205
and removing the bulb holder and the bulb.
– Replace the blown bulb in the bulb holder (press and turn anti-
clockwise to remove) with a new bulb (press and turn clockwise
to insert).
– Installation is done in the reverse order.
– Check whether the new bulb is working.
Note
Although it is not necessary, previously remove the rigid cover
fig. 208
Fig. 205 Turn signal
for easier turn signal bulb changes.
⇒ page 272,
Advertisement
Table of Contents
