Table of Contents
Advertisement
Equipment and accessories
Before mounting equipment and accessories (e.g. bicycle
rack) please observe the following notes.
The equipment/accessories mounted must not protrude more than 700 mm
A
from the ball joint
.
1
The total weight (mounted equipment plus the load) must not exceed 75 kg.
The maximum load depends on where the centre of gravity lies.
The maximum weight decreases as the distance between the centre of gravity
A
and the ball joint
increases.
1
The following limits apply:
If the distance is 300 mm, the total weight (incl. the equipment mounted)
must not exceed 75 kg.
If the distance is 600 mm, the total weight (incl. the equipment mounted)
must not exceed 35 kg.
Safety First
Fig. 161 Load distribu-
tion of equipment and
accessories
Operating Instructions
Only bicycle racks for a maximum of three bicycles may be used.
Equipment and accessories mounted on the towing bracket
SEAT recommends that you only mount equipment (e.g. bicycle rack) on the
towing bracket which has been officially approved.. If you wish to attach other
equipment please make sure that it has been approved by the manufacturer
for use on the towing bracket. If you mount unsuitable equipment, this can
cause damage to the towing bracket. In an extreme case, damage to the
towing bracket could cause it to break ⇒
WARNING
•
If you wish to mount equipment which has not been approved by SEAT,
please ensure that it is suitable for use on SEAT vehicles.
•
The use of unsuitable accessories can result in severe damage to the
towing bracket, which could break while pulling a trailer. Risk of accident.
•
Never use tools of any kind when fitting and removing the ball joint.
This would damage the locking device, no longer guaranteeing the correct
working order of the bracket. This could lead to an accident.
A
A
A
B
Practical Tips
Trailer towing
.
Technical Specifications
205
Advertisement
Table of Contents
