Table of Contents
Advertisement
– Briefly press the knob
its set position.
– Turn the knob to the required setting.
– Press the knob in again to prevent the setting from being
changed unintentionally.
Settings
The settings roughly correspond to the following load conditions:
A
Two front occupants, luggage compartment empty
O
A
All seats occupied, luggage compartment empty
1
A
All seats occupied, luggage compartment loaded
2
A
Driver only, luggage compartment loaded
3
Caution
Always adjust the headlights to avoid dazzling oncoming traffic. Make sure
you lower the headlights when the vehicle is more heavily laden.
Dynamic headlight range control
On vehicles with xenon lamps, the headlights automatically adapt to suit the
load being carried when the ignition is switched on and when the vehicle is
moving, depending on the load of the vehicle and the type of driving (e.g.
when accelerating and braking).
Safety First
⇒ page 120, fig. 89
to release it from
Operating Instructions
Daytime running lights*
The daytime running lights turn on automatically when the
ignition is switched on.
Activating the function
⇒ fig. 90
– Briefly press the knob
– Turn the knob to position 1.
– Press the knob in again to prevent the setting from being
changed unintentionally.
Deactivating the function
⇒ fig. 90
– Briefly press the knob
– Turn the knob to position 0.
Practical Tips
Lights and visibility
Fig. 90 Daytime running
lights switch
to release it from its set position.
to release it from its set position.
Technical Specifications
121
Advertisement
Table of Contents
