Seat Exeo ST 2011 Owner's Manual page 281

Changing the side light bulb
The procedure for changing the bulb is the same on both
sides.
Safety First
Fig. 220 Side light
Fig. 221 Side light
Operating Instructions
– Switch off the ignition and the lights.
– Raise the bonnet.
⇒ fig. 220
– Move the brace
remove the rigid cover, separating the brace side and then
removing the two tabs from the other end of the cover.
– Remove the bulb holder by pulling on the grip
also be removed by pulling on the bulb holder wires).
– Separate the bulb from the bulb holder by pulling both pieces
anti-clockwise.
– Fit the new bulb by pressing on the bulb holder.
– Insert the bulb into the socket and press on the bulb holder grip.
– Fit the cover, first inserting the side tabs and then closing the
cover and the brace. Make sure that the gasket sits well on the
casing cover during the operation.
– Check whether the new bulb is working.
Changing the xenon bulb
The procedure for changing the bulb is the same on both sides.
WARNING
This type of bulb should be changed at a qualified workshop.
Practical Tips
If and when
A
in the direction of the arrow and
1
⇒ fig. 221
(it can
Technical Specifications
279